Brinell

Integral 1

LD750 / LD250

Brinell, Easydur

Automatic hardness testing machine with

test loads from 1 to 3000 kgf. Brinell HBW.

Large sample capabilities.

Learn More

LD750 / LD250

Affri, Brinell, Universal

Automatic hardness testing machine

with test loads from 1 to 3000 kgf.

Touchscreen PC with preinstalled software.

Learn More

LD3000

BK 30 Brinell Scope

Affri, Brinell

Simple and smart hardness testing machines with

test loads from 3 to 3000 kgf. Brinell HBW and universal.

Learn More

BK 30 Brinell Scope

Affri, Brinell, Portable

Portable digital microscope for automatic Brinell measurement

indent reading conforms to ASTM E10/ISO 6506 international standards.

Learn More

Integral 1

Request A Quote

Test loads

From 1 to 3000 kgf (From 9,807 to 29421 N)

Brinell HBW ISO 6506 / ASTM E-10

HBW 1/30 – HBW 2.5/15.625 – HBW 2.5/31.25 – HBW 2.5/62.5 – HBW 2.5/187.5 – HBW 5/25 – HBW 5/31.25 – HBW 5/62.5 – HBW 5/125 – HBW 5/250 – HBW 5/750 – HBW 10/100 – HBW 10/125 – HBW 10/250 – HBW 10/500 – HBW 10/1000 – HBW 10/1500 – HBW 10/3000
Optional: HBW 1/1 – HBW 1/1.25 – HBW 1/2.5 – HBW 1/5 – HBW 2.5/6.25 – HBW 2.5/7.8125

Standards

EN-ISO 6506 / ASTM E-10

X/Y Base

400 X 400 mm (Motorized on request)

Vertical Head Stroke

0/500 mm Motorized (700 on request)

Depth Capacity

170 mm (More on request)

Preload

29.4 - 98.1 N (3 - 10 kgf)

Test Loads

Brinell: 9.807 - 24.52 - 49.03 - 61.29 - 98.07 - 153.2 - 245.2 - 294.2 - 306.5 - 612.9 - 980.7 - 1226 - 1839 - 2451 - 4903 - 7355 - 9807 - 14710 - 29421 N ( 1 - 2,5 - 5 - 6.25 - 10 - 15.6 - 25 - 30 - 31.2 - 62.5 - 100 - 125 - 187.5 - 250 - 500 - 750 - 1000 - 1500 - 3000 kgf). From 1 to 3000kgf with infinite configuration step.

Feasible Tests

Load accuracy

Better than 0.05%

LD750 / LD250

Request A Quote

Test Loads

LD250: From 1 to 250 kgf (9,807 to 2452 N)

LD750: From 3 to 3000 kgf (29.4 to 29421 N)

Rockwell ISO 6508 / ASTM E-18:

HRA – HRB – HRC – HRD – HRF – HRG – HRL – HRM – HRR / HRN – HRT – HRS – HRW – HRX – HRY

Brinell HBW ISO 6506 / ASTM E-10

HBW1/30 – HBW2.5/15.625 – HBW2.5/31.25 – HBW2.5/62.5 – HBW2.5/187.5 – HBW5/25 – HRW5/62,5 – HBW5/125 – HBW5/250 – HBW5/750 – HBW10/100 – HBW10/250 – HBW10/500 – HBW10/1000 – HBW10/1500 – HBW10/3000

Brinell HBWT ASTM E103

HBWT2.5/62.5 – HBWT2.5/187.5 – HBWT5/125 – HBWT5/250 – HBWT5/750 – HBWT10/500 – HBWT10/1000 – HBWT10/1500 – HBWT10/3000

Vickers ISO 6507 / ASTM E-384 / ASTM E-92

HV1 – HV2 – HV3 – HV5 – HV10 – HV20 – HV30 – HV50 – HV100

Standards

EN-ISO 6506-2 / EN-ISO 6507-2 / EN-ISO 6508-2 / EN-ISO 2039 / ISO 868 / ASTM-E10 / ASTM-E18 / ASTM-E103 / ASTM 2240 / ASTM-E384 / JIS

Indenter Stroke

Motorized 30 mm / 1.2" with automatic contact

Height Capacity

LD750: Motorized 720mm / 28″ (more on request)
LD250: Motorized 390mm / 15″ (more on request)

Depth Capacity

LD750: 265 mm / 10.5” (more on request)
LD250: 190 mm / 7.5” (more on request)

Working Table

LD750: 480 x 675 mm / 19 x 26 “ (more on request)
LD250: 330 x 390 mm / 13 x 15.5 “ (more on request)

Preload

29.4 - 98.1 N (3 - 10 kgf)

Load accuracy

Better than 0.1%

Force Range

Depending on the models:
Rockwell: 588.4 - 980.7 - 1471 N (60 - 100 - 150 kgf)

Superficial Rockwell:

147.1 - 294.2 - 441.3 N (15 - 30 - 45 kgf)

Brinell:

9.807 - 24.52 - 49.03 - 61.29 - 98.07 - 153.2 - 245.2 - 294.2 - 306.5 - 612.9 - 1226 - 1839 - 2452 - 4903 - 7355 - 9870 - 14710 - 29421N
(1 - 2.5 - 5 - 6.25 - 10 - 15.625 - 25 - 30 - 31.2 - 62.5 - 125 - 187.5 - 250 - 500 - 750 - 1000 - 1500 - 3000kgf)

Vickers - Knoop:

9.807 - 29.42 - 49.03 - 98.07 - 147.1 - 196 - 294.2 - 490.35 - 980.7 N (1 - 3 - 5 - 10 - 15 - 20 - 30 - 50 - 100 kgf)

Optional tests:

49 - 132 - 358 - 961 N (For plastics and rubbers as per EN-ISO 2039 std)
Shore A - D

Feasible Tests

Depending on the models:

Rockwell:

=HRA - HRB - HRC - HRD - HRE - HRF - HRG - HRH - HRK - HRL - HRM - HRP - HRR - HRS - HRV

Superficial Rockwell:

HR15N/T/S/W/X/Y - HR30N/T/S/W/X/Y - HR45N/T/S/W/X/Y
Brinell HBW: HBW 1/1 – HBW 1/1.25 – HBW 1/2.5 – HBW 1/5 – HBW 1/30 – HBW 2.5/6.25 – HBW 2.5/7.8125 - HBW 2.5/15.625 – HBW 2.5/31.25 – HBW 2.5/62.5 – HBW 2.5/187.5 – HBW 5/25 – HBW 5/31.25 – HBW 5/62.5 – HBW 5/125 – HBW 5/250 – HBW 5/750 – HBW 10/100 – HBW 10/125 – HBW 10/250 – HBW 10/500 – HBW 10/1000 – HBW 10/1500 – HBW 10/3000

Brinell HBWT:

1/30 - 2.5/15.6 - 2.5/31.5 - 5/125(3) (Aluminum and alloys) - 2.5/62.5(2) (Aluminum and alloys) - 2.5/187.5(6) (Aluminum and alloys) - 2.5/187.5(5) (Carbon steel) - 2.5/187.5(1) (Cast iron) - 5/125 - 5/250 - 5/750 - 10/500 - 10/1000 - 10/1500 - 10/3000
Vickers - Knoop: HV1 - HV3 - HV5 - HV10 - HV15 - HV20 - HV30 - HV50 - HV100
Shore A - D

LD3000

Request A Quote

Test loads

From 3 to 3000 kgf (From 29,42 to 29421 N) with infinite configuration step

Brinell HBW ISO 6506 / ASTM E-10

HBW 1/5 – HBW 1/10 – HBW 1/30 – HBW 2.5/6.25 – HBW 2.5/15.625 – HBW 2.5/31.25 – HBW 2.5/62.5 HBW 2.5/187.5 – HBW 5/25 – HBW 5/31.25 – HBW 5/62.5 – HBW 5/125 – HBW 5/250 – HBW 5/750

HBW 10/100 – HBW 10/125 – HBW 10/250 – HBW 10/500 – HBW 10/1000 – HBW 10/1500 – HBW 10/3000

Standards

EN-ISO 6506-1 / EN-ISO 6507 / ASTM E-10 / ASTM E-384 / ASTM E-92

Indenter and Clamping Hood Stroke

30 mm

Elevating Screw Stroke

150 mm. Removing the elevating screw, the vertical capacity increase till 300 mm for large samples.

Depth Capacity

190 mm

Preload

29.4 - 98.1 N (3 - 10 kgf)

Test Loads

Brinell: 24.52 - 49.03 - 61.29 - 98.07 - 153.2 - 245.2 - 294.2 - 306.5 - 612.9 - 980.7 - 1226 - 1839 - 2451 - 4903 - 7355 - 9807 - 29421 N ( 1 - 2,5 - 5 - 6.25 - 10 - 15.6 - 25 - 30 - 31.2 - 62.5 - 100 - 125 - 187.5 - 250 - 500 - 750 - 1000 - 1500 - 3000 kgf). From 3 to 3000kgf with infinite configuration step.
Vickers (On request): 98.07 - 147.1 -294.2 - 490.3 - 980.7 N (10 - 15 - 30 - 50 - 100 kgf)

Feasible Tests

LD 3000: Only indentation
LD 3000 A: Automatic indentation reading with onboard LCD and portable probe
Brinell HBW 1/5 – HBW 1/10 - HBW 1/30 – HBW 2.5/6.25 - HBW 2.5/15.625 – HBW 2.5/31.25 – HBW 2.5/62.5 – HBW 2.5/187.5 – HBW 5/25 – HBW 5/31.25 – HBW 5/62.5 – HBW 5/125 – HBW 5/250 – HBW 5/750 – HBW 10/100 – HBW 10/125 – HBW 10/250 – HBW 10/500 – HBW 10/1000 – HBW 10/1500 – HBW 10/3000
Vickers HV 3 - HV 5 - HV 10 - HV 20 - HV 30 - HV 50 - HV 100

Load accuracy

Better than 0.05%

BK 30 Brinell Scope

Request A Quote

Automatic ball indentation measurement Ø 2.5 or 5 or 10 mm

Automatic light adjustment
Accuracy and repeatability of measurement +/- 1%
Create and print reports with results and statistics
Internet connection for remote data network, calibration, service and software updates

BRINELL HBWT ISO 6506 – ASTM E10

HBW 2.5/15.62 HBW 2.5/31.25 HBW 2.5/15.6 HBW 2.5/187.5 HBW 5/25 HBW 5/62.5 HBW 5/125 HBW 5/250 HBW 5/750 HBW 10/100 HBW 10/250 HBW 10/500 HBW 10/1000 HBW 10/1500 HBW 10/3000

Standards

ASTM E-10 / ISO 6506

Feasible Tests

Probe A: Objective 20X - Automatic Brinell reader for indentation of Ø 5 - 10 mm
Probe B (Optional): Objective 40X - Automatic Brinell reader for indentation of Ø 2.5 mm

Reading

Automatic indent reading with autofocus

Data Output

USB

Data Export
jpg, bmp, PDF, txt, csv, Excel

Operating System
Windows

Computer
Tablet touchscreen 10.1" IPS, Windows, Full HD, RAM 4GB, SSD 64GB, WI-FI, Bluetooth, Ethernet

Load accuracy

Better than 1%

Brinell Hardness Testers for All Materials and Applications

Discover Brinell hardness testers designed for precision and reliability. Our machines are optimized for testing large components and materials with coarse structures, offering robust solutions for industries requiring accurate and efficient hardness testing.

Materials Tested with Brinell Hardness Testers:

Metals and Alloys: Steel (e.g., carbon steel, stainless steel, and hardened steel), aluminum, brass, copper, and cast iron.
Specialized Materials: Large forgings, castings, and heat-treated metals.

Parts Suitable for Brinell Hardness Testing:

Industrial and Heavy Components: Large gears, shafts, forged components, casts and machine frames.
Automotive and Aerospace Parts: Brake rotors, engine blocks, and landing gear components.
Construction Materials: Structural steel, reinforcement bars (rebar), and heavy machinery components.
Tooling and Manufacturing: Molds, dies, and large workpieces with coarse surfaces.

Why Choose Brinell Hardness Testing?

The Brinell hardness test is ideal for large components and materials with irregular surfaces, offering reliable and repeatable results. It provides a wide testing area, ensuring accurate representation of a material’s hardness. This method is commonly used in heavy industries such as automotive, aerospace, metalworking, steel shops, forges and construction.

Key Features of Our Brinell Hardness Testers:

Designed for testing large parts and materials with non-uniform surfaces.
Equipped with high-precision load control and optical systems for accurate indentation measurement.
Available in manual, semi-automatic, and fully automatic models to meet diverse industrial requirements.
Robust construction ensures durability in both production and laboratory environments.